Issues:
This page has no doctype which triggers quirks mode in IE, Firefox and most other browsers. This means pages may look different in different browsers.
Add a DOCTYPE statement to the top of the document.
This page uses cookies and has no obvious privacy policy. Companies in the EU using cookies must comply with the Privacy and Electronic Communications (EC Directive) Regulations 2003 by providing a privacy policy. Cookies: PHPSESSID=c864edaa7c0fc2470ee
Line 1 EU Privacy Regulations
The EC Privacy Regulations carry a maximum fine of 짙5,000 / �궗7,000 for failure to comply.
To comply, place a link on every page labeled "Privacy Policy" referring to a page describing how your site uses cookies, and how to disable them.
Have a link labeled 'Home' on every page on the site, except for the home page.
Line 1 Usability.gov 5:1
Many sites place the organization's logo on the top of every page and link it to the homepage.
While many users expect logos are clickable, around 25% will not realize that links to the homepage.
Therefore, include a link labeled 'Home' near the top of the page to help those users.
<!--
ZeroBoard에 대한 라이센스 명시입니다.
아래 라이센스에 동의하시는 분만 제로보드를 사용할수 있습니다.
프로그램명 : Zeroboard
배포버젼 : 4.1 pl 9 (2009. 2. 9)
개발자 : zero
Homepage : http://zeroboard.com
1. 제로보드의 배포권은 ZEROBOARD.COM에서 허용한 곳에만 있습니다.
(허락 맡지 않은 재배포는 허용하지 않습니다.)
2. 제로보드는 저작권을 아래 3번항목에 의해 표기하는 한도내에서
개인홈페이지 및 학교나 교회등의 비영리단체, 기업이나 기타 영리단체에서 사용할수 있습니다.
(반국가 단체나 불법 싸이트에서의 사용은 금지합니다)
3. 제로보드 사용시 저작권 명시부분을 훼손하면 안됩니다.
프로그램 소스, html소스상의 라이센스 및 웹상 출력물 하단에 있는 카피라이트와 링크를 수정하지 마십시요.
(저작권 표시는 게시판 배포시 작성된 형식만을 허용합니다. 임의 수정은 금지합니다)
4. 단, 정식 등록버젼은 저작권 표시를 삭제할수 있습니다.
정식 등록버젼에 대한 문의는 http://zeroboard.com 에서 문의 방법을 찾아주시기 바랍니다.
5. 링크서비스등의 기본 용도에 맞지 않는 사용은 금지합니다.
6. 제로보드의 사용으로 인한 데이타 손실 및 기타 손해등 어떠한 사고나 문제에 대해서 ZEROBOARD.COM은 절대 책임을 지지 않습니다.
7. 제로보드에 대해 ZEROBOARD.COM은 유지/ 보수의 의무가 없습니다.
8. 제로보드 소스는 개인적으로 사용시 수정하여 사용할수 있지만 수정된 프로그램의 재배포는 금지합니다.
(저작권 관련 부분은 수정금지입니다)
9. 제로보드에 쓰인 스킨의 저작권은 스킨 제작자에게 있으며 제작자의 동의하에 수정배포가 가능합니다.
10. 기타 의문사항은 http://zeroboard.com 을 이용해 주시기 바랍니다.
(질문등에 대한 내용은 메일로 받지 않습니다)
-->
No DOCTYPE found! Checking with default HTML or XHTML document type.
Line 40 HTML Validation
No DOCTYPE Declaration could be found or recognized in this document. This generally means that the document is not declaring its Document Type at the top. It can also mean that the DOCTYPE declaration contains a spelling error, or that it is not using the correct syntax.
<html>
<head>
<title>l</title>
<meta http-equiv=Content-Type content=text/
html; charset=EUC-KR>
Add an H1 tag just before the main content describing the page.
html; charset=EUC-KR>
<link rel=StyleSheet HREF=ski
n/DQ_Revolution_Frontier_Gallery/style.css type=text/css title=style>
n/DQ_Revolution_Frontier_Gallery/style.css type=text/css title=style>
<script language='JavaScript
'>
'>
var select_obj;
function ZB_layerAction(name,status) {
var obj=document.all[name];
var _tmpx,_tmpy, marginx, marginy;
For SCRIPTs and APPLETs, ensure that event handlers are input device-independent. Do not write event handlers that rely on mouse coordinates since this prevents device-independent input.
Line 50 WCAG 2.0 A 2.1.1
Add an equivalent event handler that accepts keyboard input via event.keyCode.
_tmpx = event.clientX + parseInt(obj.offsetWidth);
For SCRIPTs and APPLETs, ensure that event handlers are input device-independent. Do not write event handlers that rely on mouse coordinates since this prevents device-independent input.
Line 51 WCAG 2.0 A 2.1.1
Add an equivalent event handler that accepts keyboard input via event.keyCode.
_tmpy = event.clientY + parseInt(obj.offsetHeight);
_marginx = document.body.clientWidth - _tmpx;
_marginy = document.body.clientHeight - _tmpy ;
if(_marginx < 0)
For SCRIPTs and APPLETs, ensure that event handlers are input device-independent. Do not write event handlers that rely on mouse coordinates since this prevents device-independent input.
Line 55 WCAG 2.0 A 2.1.1
Add an equivalent event handler that accepts keyboard input via event.keyCode.
_tmpx = event.clientX + document.body.scrollLeft + _marginx ;
else
For SCRIPTs and APPLETs, ensure that event handlers are input device-independent. Do not write event handlers that rely on mouse coordinates since this prevents device-independent input.
Line 57 WCAG 2.0 A 2.1.1
Add an equivalent event handler that accepts keyboard input via event.keyCode.
_tmpx = event.clientX + document.body.scrollLeft ;
if(_marginy < 0)
For SCRIPTs and APPLETs, ensure that event handlers are input device-independent. Do not write event handlers that rely on mouse coordinates since this prevents device-independent input.
Line 59 WCAG 2.0 A 2.1.1
Add an equivalent event handler that accepts keyboard input via event.keyCode.
_tmpy = event.clientY + document.body.scrollTop + _marginy +20;
else
For SCRIPTs and APPLETs, ensure that event handlers are input device-independent. Do not write event handlers that rely on mouse coordinates since this prevents device-independent input.
Line 61 WCAG 2.0 A 2.1.1
Add an equivalent event handler that accepts keyboard input via event.keyCode.
_tmpy = event.clientY + document.body.scrollTop ;
obj.style.posLeft=_tmpx-13;
obj.style.posTop=_tmpy-12;
if(status=='visible') {
if(select_obj) {
select_obj.style.visibility='hidden';
select_obj=null;
}
select_obj=obj;
}else{
select_obj=null;
}
obj.style.visibility=status;
}
function print_ZBlayer(name, homepage, mail, member_no, boardID, writer, traceID, traceType, isAdmin, isMember) {
var printHeight = 0;
var printMain="";
if(homepage) {
printMain = "<tr onMouseOver=this.style.backgroundColor='#bbbbbb' onMouseOut=this.style.backgroundColor='' onMousedown=window.open('"+homepage+"');><td style=font-family:굴림;font-size:9pt height=18 nowrap> <img src=images/n_homepage.gif border=0 align=absmiddle> 홈페이지 &nb
sp;</
td></tr>";
sp;</
td></tr>";
printHeight = printHeight + 16;
}
if(mail) {
printMain = printMain + "<tr onMouseOver=this.style.backgroundColor='#bbbbbb' onMouseOut=this.style.backgroundColor='' onMousedown=window.open('open_window.php?mode=m&str="+mail+"','ZBremote','width=1,height=1,left=1,top=1');><td style=font-family:굴림;font-size:9pt height=18 nowrap> <img src=images/n_mail.gif border=0 align=absmiddle> 메일 보내기 &n
bsp;<
/td></tr>";
bsp;<
/td></tr>";
printHeight = printHeight + 16;
}
if(member_no) {
if(isMember) {
printMain = printMain + "<tr onMouseOver=this.style.backgroundColor='#bbbbbb' onMouseOut=this.style.backgroundColor='' onMousedown=window.open('view_info.php?member_no="+member_no+"','view_info','width=400,height=510,toolbar=no,scrollbars=yes');><td style=font-family:굴림;font-size:9pt height=18 nowrap> <img src=images/n_memo.gif border=0 align=absmiddle> 쪽지 보내기 &n
bsp;<
/td></tr>";
bsp;<
/td></tr>";
printHeight = printHeight + 16;
}
printMain = printMain + "<tr onMouseOver=this.style.backgroundColor='#bbbbbb' onMouseOut=this.style.backgroundColor='' onMousedown=window.open('view_info2.php?member_no="+member_no+"','view_info','width=400,height=510,toolbar=no,scrollbars=yes');><td style=font-family:굴림;font-size:9pt height=18 nowrap> <img src=images/n_information.gif border=0 align=absmiddle> 회원정보 보기 &
nbsp;
</td></tr>";
nbsp;
</td></tr>";
printHeight = printHeight + 16;
}
if(writer) {
printMain = printMain + "<tr onMouseOver=this.style.backgroundColor='#bbbbbb' onMouseOut=this.style.backgroundColor='' onMousedown=location.href='zboard.php?id="+boardID+"&sn1=on&sn=on&ss=off&sc=off&keyword="+writer+"';><td style=font-family:굴림;font-size:9pt height=18 nowrap> <img src=images/n_search.gif border=0 align=absmiddle> 이름으로 검색 &
nbsp;
</td></tr>";
nbsp;
</td></tr>";
printHeight = printHeight + 16;
}
if(isAdmin) {
if(member_no) {
printMain = printMain + "<tr onMouseOver=this.style.backgroundColor='#bbbbbb' onMouseOut=this.style.backgroundColor='' onMousedown=window.open('open_window.php?mode=i&str="+member_no+"','ZBremote','width=1,height=1,left=1,top=1');><td style=font-family:굴림;font-size:9pt height=18 nowrap> <img src=images/n_modify.gif border=0 align=absmiddle> <font color=darkred>회원정보 변경 &
nbsp;
</td></tr>";
nbsp;
</td></tr>";
printHeight = printHeight + 16;
}
printMain = printMain + "<tr onMouseOver=this.style.backgroundColor='#bbbbbb' onMouseOut=this.style.backgroundColor='' onMousedown=window.open('open_window.php?mode="+traceType+"&str="+traceID+"','ZBremote','width=1,height=1,left=1,top=1');><td style=font-family:굴림;font-size:9pt height=18 nowrap> <img src=images/n_relationlist.gif border=0 align=absmiddle> <font color=darkred>관련글 추
적</font> &n
bsp;<
/td></tr>";
적</font> &n
bsp;<
/td></tr>";
printHeight = printHeight + 16;
}
var printHeader = "<div id='"+name+"' style='position:absolute; left:10px; top:25px; width:127; height: "+printHeight+"; z-index:1; visibility: hidden' onMousedown=ZB_layerAction('"+name+"','hidden')><table border=0><tr><td colspan=3 onMouseover=ZB_layerAction('"+name+"','hidden') height=3></t
d></t
r><tr><td width=5 onMouseover=ZB_layerAction('"+name+"','hidden') rowspan=2> </t
d><td height=5></t
d></t
r><tr><td><table style=cursor:hand border='0' cellspacing='1' cellpadding='0' bgcolor='black' width=100% height=100%><tr><td valign=top bgcolor=white><table border=0 cellspacing=0 cellpadding=3 width=100% height=100%>";
d></t
r><tr><td width=5 onMouseover=ZB_layerAction('"+name+"','hidden') rowspan=2> </t
d><td height=5></t
d></t
r><tr><td><table style=cursor:hand border='0' cellspacing='1' cellpadding='0' bgcolor='black' width=100% height=100%><tr><td valign=top bgcolor=white><table border=0 cellspacing=0 cellpadding=3 width=100% height=100%>";
var printFooter = "</tabl
e></t
d></t
r></tabl
e></t
d><td width=5 rowspan=2 onMouseover=ZB_layerAction('"+name+"','hidden')> </t
d></t
r><tr><td colspan=3 height=10 onMouseover=ZB_layerAction('"+name+"','hidden')></t
d></t
r></tabl
e></di
v>";
e></t
d></t
r></tabl
e></t
d><td width=5 rowspan=2 onMouseover=ZB_layerAction('"+name+"','hidden')> </t
d></t
r><tr><td colspan=3 height=10 onMouseover=ZB_layerAction('"+name+"','hidden')></t
d></t
r></tabl
e></di
v>";
document.writeln(printHeader+printMain+printFooter);
}
</script> <script language="javascript
">
">
browserName = navigator.appName;
browserVer = parseInt(navigator.appVersion);
if(browserName == "Netscape" && browserVer >= 3){ init = "net"; }
else { init = "ie"; }
if(((init == "net")&&(browserVer >=3))||((init == "ie")&&(browserVer >= 4))){
sn_on=new Image;
sn_off=new Image;
sn_on.src= "skin/DQ_Revolution_Frontier_Gallery/name_on.gif";
sn_off.src= "skin/DQ_Revolution_Frontier_Gallery/name_off.gif";
ss_on=new Image;
ss_off=new Image;
ss_on.src= "skin/DQ_Revolution_Frontier_Gallery/subject_on.gif";
ss_off.src= "skin/DQ_Revolution_Frontier_Gallery/subject_off.gif";
sc_on=new Image;
sc_off=new Image;
sc_on.src= "skin/DQ_Revolution_Frontier_Gallery/content_on.gif";
sc_off.src= "skin/DQ_Revolution_Frontier_Gallery/content_off.gif";
}
function OnOff(name) {
if(((init == "net")&&(browserVer >=3))||((init == "ie")&&(browserVer >= 4))) {
if(document.search[name].value=='on')
{
document.search[name].value='off';
ImgSrc=eval(name+"_off.src");
document[name].src=ImgSrc;
}
else
{
document.search[name].value='on';
ImgSrc=eval(name+"_on.src");
document[name].src=ImgSrc;
}
}
}
</script>
<script language="javascript
">
">
function reverse() {
var i, chked=0;
if(confirm('목록을 반전하시겠습니까?\n\n반전을 원하지 않는다면 취소를 누르시면 다음으로 넘어갑니다'))
{
for(i=0;i<document.list.length;i++)
{
if(document.list[i].type=='checkbox')
{
if(document.list[i].checked) { document.list[i].checked=false; }
else { document.list[i].checked=true; }
}
}
}
for(i=0;i<document.list.length;i++)
{
if(document.list[i].type=='checkbox')
{
if(document.list[i].checked) chked=1;
}
}
if(chked) {
if(confirm('선택된 항목을 보시겠습니까?'))
{
document.list.selected.value='';
document.list.exec.value='view_all';
for(i=0;i<document.list.length;i++)
{
if(document.list[i].type=='checkbox')
{
if(document.list[i].checked)
{
document.list.selected.value=document.list[i].value+';'+document.list.selected.value;
}
}
}
document.list.submit();
return true;
}
}
}
function delete_all() {
var i, chked=0;
for(i=0;i<document.list.length;i++)
{
if(document.list[i].type=='checkbox')
{
if(document.list[i].checked) chked=1;
}
}
if(chked)
{
document.list.selected.value='';
document.list.exec.value='delete_all';
for(i=0;i<document.list.length;i++)
{
if(document.list[i].type=='checkbox')
{
if(document.list[i].checked)
{
document.list.selected.value=document.list[i].value+';'+document.list.selected.value;
}
}
}
window.open("select_list_all.php?id=toy2&selected="+document.list.selected.value,"게시물정리","width=260,height=180,toolbars=no,resize=no,scrollbars=no");
}
else {alert('정리할 게시물을 선택하여 주십시요');}
}
function category_change(obj) {
var myindex=obj.selectedIndex;
document.search.category.value=obj.options[myindex].value;
document.search.submit();
return true;
}
//-->
If you set any of the colors on the BODY tag you must set all of them.
Line 238 WCAG 2.0 AA F24
In HTML the color attributes are TEXT, BGCOLOR, LINK, ALINK and VLINK. In CSS the attributes are COLOR and BACKGROUND-COLOR.
Some users have browser defaults set to white text on a black background, so setting one color without setting the others can result in black text on a black background.
The BODY LEFTMARGIN attribute is an Internet Explorer specific extension.
Replace this with a CSS rule:
body { margin: 4px; }
The BODY TOPMARGIN attribute is an Internet Explorer specific extension.
Replace this with a CSS rule:
body { margin: 4px; }
Add an H1 tag just before the main content describing the page.
<body topmargin
='0' leftmargin
='0' marginwidth
='0' marginheight
='0' bgcolor=black
>
This happens when the version of HTML used on this page doesn't support an attribute with this name. This can happen
if the attribute is misspelled, is uppercase or mixed case in XHTML, or isn't supported by some HTML versions.
For example, HTML 4 DOCTYPEs don't allow HTML 5 attributes and Strict DOCTYPEs don't allow stylistic attributes
which were present in earlier versions of HTML.
='0' leftmargin
This happens when the version of HTML used on this page doesn't support an attribute with this name. This can happen
if the attribute is misspelled, is uppercase or mixed case in XHTML, or isn't supported by some HTML versions.
For example, HTML 4 DOCTYPEs don't allow HTML 5 attributes and Strict DOCTYPEs don't allow stylistic attributes
which were present in earlier versions of HTML.
='0' marginwidth
This happens when the version of HTML used on this page doesn't support an attribute with this name. This can happen
if the attribute is misspelled, is uppercase or mixed case in XHTML, or isn't supported by some HTML versions.
For example, HTML 4 DOCTYPEs don't allow HTML 5 attributes and Strict DOCTYPEs don't allow stylistic attributes
which were present in earlier versions of HTML.
='0' marginheight
This happens when the version of HTML used on this page doesn't support an attribute with this name. This can happen
if the attribute is misspelled, is uppercase or mixed case in XHTML, or isn't supported by some HTML versions.
For example, HTML 4 DOCTYPEs don't allow HTML 5 attributes and Strict DOCTYPEs don't allow stylistic attributes
which were present in earlier versions of HTML.
='0' bgcolor=black
>
<div align=center>
<table border=0 cellspacing=0 cellpadding=0 width=10
0% height
=1 style="table-layout:fixed;">
<col width=10
0%></co
l><tr><td>
<img src=image
s/t.gif border=0 width=98% height=1 name=zb_get_table_width><br>
<img src=image
s/t.gif border=0 name=zb_target_resize width=1 height=1></td></tr></table>
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border=0 cellspacing=0 cellpadding=0 width=10
An attribute value must be a literal unless it contains only name characters.
Line 239 HTML Validation
0% height
This happens when the version of HTML used on this page doesn't support an attribute with this name. This can happen
if the attribute is misspelled, is uppercase or mixed case in XHTML, or isn't supported by some HTML versions.
For example, HTML 4 DOCTYPEs don't allow HTML 5 attributes and Strict DOCTYPEs don't allow stylistic attributes
which were present in earlier versions of HTML.
=1 style="table-layout:fixed;">
The COL and COLGROUP elements are not supported by BlackBerry 5.0.
Line 239 BlackBerry ≤ 5.0
<col width=10
An attribute value must be a literal unless it contains only name characters.
Line 239 HTML Validation
0%></co
l><tr><td>
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
Omitting IMG WIDTH or HEIGHT attributes means page text jumps about as images load.
Line 239 Usability.gov 14:3
This makes the page very hard to read while it's loading, and the user may click on the wrong link if it moves as it's being clicked.
Add width and height attributes to the img tag matching the image dimensions. Authoring tools
like Dreamweaver can automate this process.
<img src=image
s/t.gif border=0 width=98% height=1 name=zb_get_table_width><br>
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
Omitting IMG WIDTH or HEIGHT attributes means page text jumps about as images load.
Line 239 Usability.gov 14:3
This makes the page very hard to read while it's loading, and the user may click on the wrong link if it moves as it's being clicked.
Add width and height attributes to the img tag matching the image dimensions. Authoring tools
like Dreamweaver can automate this process.
<img src=image
s/t.gif border=0 name=zb_target_resize width=1 height=1></td></tr></table>
<link rel="StyleSheet" HREF="skin/DQ_Revolution_Frontier_Gallery/css/black/style.css" type="text/css" title="style
">
">
<!--
■ Skin Version: DQ Revolution Gallery 1.7.1 , gd:bundled (2.0.28 compatible) , php:4.4.8
■ ThumbnailEngine Version: 2.13 for Revolution, latest modify: 2008-07-15
-->
<script type="text/JavaScript">
var id="toy2", no="", page="1", select_arrange="headnum", desc="asc", page_num="16", keyword="", category="", sn="off", ss="on", sc="on", su="", url="/bbs/zboard.php?id=toy2", pic_overLimit1="1024", pic_overLimit2="1000", zbURL="http://www.designnu.com/bbs/", zbSkin_dir="skin/DQ_Revolution_Frontier_Gallery", dqCss_dir="skin/DQ_Revolution_Frontier_Gallery/css/black/", fckSkin_dir="skin/DQ_Revolution_Frontier_Gallery/fck_skins/dq_white/";
</script>
<script type="text/javascript" src="skin/DQ_Revolution_Frontier_Gallery/plug-ins/highslide/highslide-dq.packed.js"></script>
<script type="text/javascript">
hs.graphicsDir = 'skin/DQ_Revolution_Frontier_Gallery/plug-ins/highslide/graphics/';
hs.outlineType = null;
hs.showCredits = false;
hs.restoreTitle = '';
hs.dimmingDuration = 50;
</script>
<script src="skin/DQ_Revolution_Frontier_Gallery/default.js" type="text/JavaScript"></script>
<div id="floatNaviArrow_top" class="floatNaviArrow">
<img src="skin/DQ_Revolution_Frontier_Gallery/css/black//garrow_top.gif"
/></div>
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
Omitting IMG WIDTH or HEIGHT attributes means page text jumps about as images load.
Line 260 Usability.gov 14:3
This makes the page very hard to read while it's loading, and the user may click on the wrong link if it moves as it's being clicked.
Add width and height attributes to the img tag matching the image dimensions. Authoring tools
like Dreamweaver can automate this process.
<img src="skin/DQ_Revolution_Frontier_Gallery/css/black//garrow_top.gif"
/></div>
<div id="floatNaviArrow_left" class="floatNaviArrow">
<img src="skin/DQ_Revolution_Frontier_Gallery/css/black//garrow_left.gif"
/></div>
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
Omitting IMG WIDTH or HEIGHT attributes means page text jumps about as images load.
Line 261 Usability.gov 14:3
This makes the page very hard to read while it's loading, and the user may click on the wrong link if it moves as it's being clicked.
Add width and height attributes to the img tag matching the image dimensions. Authoring tools
like Dreamweaver can automate this process.
<img src="skin/DQ_Revolution_Frontier_Gallery/css/black//garrow_left.gif"
/></div>
<div id="floatNaviArrow_right" class="floatNaviArrow">
<img src="skin/DQ_Revolution_Frontier_Gallery/css/black//garrow_right.gif"
/></div>
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
Omitting IMG WIDTH or HEIGHT attributes means page text jumps about as images load.
Line 262 Usability.gov 14:3
This makes the page very hard to read while it's loading, and the user may click on the wrong link if it moves as it's being clicked.
Add width and height attributes to the img tag matching the image dimensions. Authoring tools
like Dreamweaver can automate this process.
<img src="skin/DQ_Revolution_Frontier_Gallery/css/black//garrow_right.gif"
/></div>
<div id="controlbar" class="highslide-overlay controlbar">
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
<a href="#" class="previous" onclick="return hs.previous(this)" title="왼쪽 방향키를 누르셔도 됩니다"></a>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
<a href="#" class="next" onclick="return hs.next(this)" title="오른쪽 방향키를 누르셔도 됩니다"></a>
</div>
<div class="highslide-caption"></div>
<div id="thumbNaviSelector"><div></div></div>
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellpadding="0" cellspacing="0" width="100%" class="thumb_area_bg">
<form method="post" name="list" action="list_all.php
"><input type="hidden" name="PHPSESSID" value="c864edaa7c0fc2470eef377343ecdb53" />
"><input type="hidden" name="PHPSESSID" value="c864edaa7c0fc2470eef377343ecdb53" />
<input type="hidden" name="page" value="1">
<input type="hidden" name="id" value="toy2">
<input type="hidden" name="select_arrange" value="headnum">
<input type="hidden" name="desc" value="asc">
<input type="hidden" name="page_num" value="16">
<input type="hidden" name="selected">
<input type="hidden" name="exec">
<input type="hidden" name="keyword" value="">
<input type="hidden" name="sn" value="off">
<input type="hidden" name="ss" value="on">
<input type="hidden" name="sc" value="on">
<t
r><td style="height:5px;"></td></tr>
r><td style="height:5px;"></td></tr>
<td>
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellpadding="0" cellspacing="2" align="left">
<tr class="info_bg">
<td height="18px" align="left" class="thumb_han" style="padding-left:11px"><a href=zboard.ph
p?&id=toy2&PHPSESSID=c864edaa7c0fc2470eef377343ecdb53><b>all list</b></a>
An attribute value must be a literal unless it contains only name characters.
Line 288 HTML Validation
p?&id=toy2&PHPSESSID=c864edaa7c0fc2470eef377343ecdb53><b>all list</b></a>
<td align="left"> <font class="thumb_list_comment">ㆍ</font
><a href='zboard.php?category=
1&
id=toy
2&pa
ge=
1&page_n
um=1
6&
sn=of
f&
ss=o
n&
sc=o
n&keywo
rd
=&select_arran
ge=headnu
m&de
sc=as
c&PHPSESS
ID=c864edaa7c0fc2470eef377343ecdb53'><font class=han>The Dancing Music Score (24)<
/a><font class=han><
/b><font class=han></
td>
Without a skip link, screen readers read out the navigation links on every page before reading the page content.
Headings can be a substitute in limited circumstances, but they're not used by all screen reader users,
and many other assistive technology users have no way to navigate via headings.
Add a "Skip to Content" link at the start of the document hidden offscreen by CSS, and made visible on focus, so it's available to keyboard and screen reader users:
<a class="accessible" href="#main">[Skip to Content]</a>
><a href='zboard.php?category=
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1&
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
id=toy
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
2&pa
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
ge=
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1&page_n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
um=1
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
6&
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
sn=of
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
f&
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
ss=o
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n&
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
sc=o
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n&keywo
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
rd
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
=&select_arran
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
ge=headnu
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
m&de
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
sc=as
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c&PHPSESS
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 289 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
ID=c864edaa7c0fc2470eef377343ecdb53'><font class=han>The Dancing Music Score (24)<
End tag for "FONT" omitted, but its declaration does not permit this.
Line 289 HTML Validation
/a><font class=han><
/b><font class=han></
End tag for "FONT" omitted, but its declaration does not permit this.
Line 289 HTML Validation
End tag for "FONT" omitted, but its declaration does not permit this.
Line 289 HTML Validation
td>
<td align="left"> <font class="thumb_list_comment">ㆍ</font
><a href='zboard.php?category=2&
id=toy2&pa
ge=1&page_n
um=16&
sn=off&
ss=on&
sc=on&keywo
rd=&select_arran
ge=headnum&de
sc=asc&PHPSESS
ID=c864edaa7c0fc2470eef377343ecdb53'><font class=han>Preschool bus (4)<
/a><font class=han><
/b><font class=han></
td>
Without a skip link, screen readers read out the navigation links on every page before reading the page content.
Headings can be a substitute in limited circumstances, but they're not used by all screen reader users,
and many other assistive technology users have no way to navigate via headings.
Add a "Skip to Content" link at the start of the document hidden offscreen by CSS, and made visible on focus, so it's available to keyboard and screen reader users:
<a class="accessible" href="#main">[Skip to Content]</a>
><a href='zboard.php?category=2&
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 290 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
id=toy2&pa
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 290 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
ge=1&page_n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 290 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
um=16&
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 290 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
sn=off&
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 290 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
ss=on&
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 290 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
sc=on&keywo
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 290 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
rd=&select_arran
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 290 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
ge=headnum&de
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 290 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
sc=asc&PHPSESS
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 290 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
ID=c864edaa7c0fc2470eef377343ecdb53'><font class=han>Preschool bus (4)<
End tag for "FONT" omitted, but its declaration does not permit this.
Line 290 HTML Validation
/a><font class=han><
/b><font class=han></
End tag for "FONT" omitted, but its declaration does not permit this.
Line 290 HTML Validation
End tag for "FONT" omitted, but its declaration does not permit this.
Line 290 HTML Validation
td>
<td align="left"> <font class="thumb_list_comment">ㆍ</font><a href='zboard.php?category=3&
id=toy2&pa
ge=1&page_n
um=16&
sn=off&
ss=on&
sc=on&keywo
rd=&select_arran
ge=headnum&de
sc=asc&PHPSESS
ID=c864edaa7c0fc2470eef377343ecdb53'><font class=han>Soft Toy (2317)<
/a><font class=han><
/b><font class=han></
td>
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 291 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
id=toy2&pa
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 291 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
ge=1&page_n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 291 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
um=16&
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 291 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
sn=off&
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 291 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
ss=on&
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 291 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
sc=on&keywo
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 291 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
rd=&select_arran
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 291 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
ge=headnum&de
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 291 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
sc=asc&PHPSESS
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 291 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
ID=c864edaa7c0fc2470eef377343ecdb53'><font class=han>Soft Toy (2317)<
End tag for "FONT" omitted, but its declaration does not permit this.
Line 291 HTML Validation
/a><font class=han><
/b><font class=han></
End tag for "FONT" omitted, but its declaration does not permit this.
Line 291 HTML Validation
End tag for "FONT" omitted, but its declaration does not permit this.
Line 291 HTML Validation
td>
<td colspan="3"> </td>
</t
d></tr></tabl
e> </t
d>
End tag for "TABLE" omitted, but its declaration does not permit this.
Line 294 HTML Validation
d></tr></tabl
End tag for "FORM" omitted, but its declaration does not permit this.
Line 294 HTML Validation
Either tags are not nested properly, or the element must contain other elements.
For example, the HEAD element must contain a TITLE element and the TR element must contain a TD element.
e> </t
d>
<td>
<table border="0" cellpadding="0" cellspacing="4" width="100%">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellpadding="0" cellspacing="4" width="100%">
<tr>
<td style="width:5px"></td>
<td class="han" align="right" align
="left">
="left">
<div class="small_han">
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a onfocus=blu
An attribute value must be a literal unless it contains only name characters.
Line 303 HTML Validation
r() href='login.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 303 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 303 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 303 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 303 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 303 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 303 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 303 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 303 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 303 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 303 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 303 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 303 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 303 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 303 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
&s_ur
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 303 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
l=%2Fbbs%2Fzboard.php%3Fid%3Dtoy2&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 303 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53'>[login</a>
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a onfocus=blu
r() href
=# onclick="window.open('member_join.php?group_no=1','zbMemberJoin','width=560,height=590,toolbars=no,resizable=yes,scrollbars=yes')">join] </a>
An attribute value must be a literal unless it contains only name characters.
Line 304 HTML Validation
r() href
An attribute value must be a literal unless it contains only name characters.
Line 304 HTML Validation
=# onclick="window.open('member_join.php?group_no=1','zbMemberJoin','width=560,height=590,toolbars=no,resizable=yes,scrollbars=yes')">join] </a>
<Zeroboard
[my info</
a>
This happens when the version of HTML used on this page doesn't support an element with this name. This can happen
if the element is misspelled, is uppercase or mixed case in XHTML, or isn't supported by some HTML versions.
For example, HTML 4 DOCTYPEs don't allow HTML 5 element and Strict DOCTYPEs don't allow stylistic elements
and frames which were present in earlier versions of HTML.
[my info</
a>
<Zeroboard
memo</
a>
This happens when the version of HTML used on this page doesn't support an element with this name. This can happen
if the element is misspelled, is uppercase or mixed case in XHTML, or isn't supported by some HTML versions.
For example, HTML 4 DOCTYPEs don't allow HTML 5 element and Strict DOCTYPEs don't allow stylistic elements
and frames which were present in earlier versions of HTML.
memo</
a>
<Zeroboard
logout] </
a>
This happens when the version of HTML used on this page doesn't support an element with this name. This can happen
if the element is misspelled, is uppercase or mixed case in XHTML, or isn't supported by some HTML versions.
For example, HTML 4 DOCTYPEs don't allow HTML 5 element and Strict DOCTYPEs don't allow stylistic elements
and frames which were present in earlier versions of HTML.
logout] </
a>
</div>
</td>
<td style="width:5px"></td>
</tr></table></td>
</tr>
<t
r><td style="height:4px;"></td></tr>
r><td style="height:4px;"></td></tr>
<t
r><td colspan="4" class="line2" style="height:1px"></td></tr>
r><td colspan="4" class="line2" style="height:1px"></td></tr>
<t
r><td colspan="4" class="line1" style="height:1px"></td></tr>
r><td colspan="4" class="line1" style="height:1px"></td></tr>
<t
r><td style="height:10px;"></td></tr>
r><td style="height:10px;"></td></tr>
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellpadding="0" cellspacing="0" width="100%" class="thumb_area_bg">
<tr><td style="padding:5px 5px 0 25px;">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellpadding="0" cellspacing="0" width="100%">
<tr>
<td width="25%" valign="top">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellspacing="0" cellpadding="0" style="table-layout:fixed;" width="100%">
<tr><td style="padding-left:10px;padding-right:10px;" height="122" align="center" valign="bottom">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&&select_arrang
e=headnum&des
c=asc
&n
o=2365&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
<img src="data/toy2/small_2365.thumb" width="120" height="120" onFocus
="blur()" border="0" class="thumb_border
"></a></td>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a href="zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 326 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 326 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 326 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 326 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 326 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 326 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 326 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 326 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 326 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 326 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 326 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=2365&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 326 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<img src="data/toy2/small_2365.thumb" width="120" height="120" onFocus
This happens when the version of HTML used on this page doesn't support an attribute with this name. This can happen
if the attribute is misspelled, is uppercase or mixed case in XHTML, or isn't supported by some HTML versions.
For example, HTML 4 DOCTYPEs don't allow HTML 5 attributes and Strict DOCTYPEs don't allow stylistic attributes
which were present in earlier versions of HTML.
="blur()" border="0" class="thumb_border
"></a></td>
</tr>
<tr align="center">
<td style="padding-top:6px;line-height:120%;padding-left:10px;padding-right:10px;">
<span style="line-height:120%">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&select_arrang
e=headnum&des
c=asc&n
o=2365&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">코리아나tv 바로가기</span></a><br>
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 331 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 331 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 331 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 331 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 331 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 331 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 331 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 331 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 331 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=2365&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 331 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">코리아나tv 바로가기</span></a><br>
<span class="thumb_list_cate">The Dancing Music Score<br> </t
d></tr>
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 332 HTML Validation
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 332 HTML Validation
d></tr>
</table>
</td>
<td width="25%" valign="top">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellspacing="0" cellpadding="0" style="table-layout:fixed;" width="100%">
<tr><td style="padding-left:10px;padding-right:10px;" height="122" align="center" valign="bottom">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&&select_arrang
e=headnum&des
c=asc&n
o=51&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
<img src="data/toy2/small_51.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a href="zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 339 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 339 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 339 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 339 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 339 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 339 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 339 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 339 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 339 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=51&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 339 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<img src="data/toy2/small_51.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
</tr>
<tr align="center">
<td style="padding-top:6px;line-height:120%;padding-left:10px;padding-right:10px;">
<span style="line-height:120%">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&select_arrang
e=headnum&des
c=asc&n
o=51&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Hello; 30149</span></a><br>
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 344 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 344 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 344 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 344 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 344 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 344 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 344 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 344 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 344 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=51&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 344 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Hello; 30149</span></a><br>
<span class="thumb_list_cate">The Dancing Music Score<br> </t
d></tr>
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 345 HTML Validation
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 345 HTML Validation
d></tr>
</table>
</td>
<td width="25%" valign="top">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellspacing="0" cellpadding="0" style="table-layout:fixed;" width="100%">
<tr><td style="padding-left:10px;padding-right:10px;" height="122" align="center" valign="bottom">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&&select_arrang
e=headnum&des
c=asc&n
o=50&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
<img src="data/toy2/small_50.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a href="zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 352 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 352 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 352 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 352 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 352 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 352 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 352 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 352 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 352 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=50&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 352 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<img src="data/toy2/small_50.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
</tr>
<tr align="center">
<td style="padding-top:6px;line-height:120%;padding-left:10px;padding-right:10px;">
<span style="line-height:120%">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&select_arrang
e=headnum&des
c=asc&n
o=50&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Nice site; 41513</span></a><br>
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 357 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 357 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 357 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 357 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 357 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 357 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 357 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 357 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 357 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=50&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 357 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Nice site; 41513</span></a><br>
<span class="thumb_list_cate">The Dancing Music Score<br> </t
d></tr>
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 358 HTML Validation
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 358 HTML Validation
d></tr>
</table>
</td>
<td width="25%" valign="top">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellspacing="0" cellpadding="0" style="table-layout:fixed;" width="100%">
<tr><td style="padding-left:10px;padding-right:10px;" height="122" align="center" valign="bottom">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&&select_arrang
e=headnum&des
c=asc&n
o=49&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
<img src="data/toy2/small_49.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a href="zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 365 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 365 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 365 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 365 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 365 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 365 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 365 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 365 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 365 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=49&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 365 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<img src="data/toy2/small_49.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
</tr>
<tr align="center">
<td style="padding-top:6px;line-height:120%;padding-left:10px;padding-right:10px;">
<span style="line-height:120%">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&select_arrang
e=headnum&des
c=asc&n
o=49&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Outstanding site; 5</span></a><br>
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 370 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 370 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 370 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 370 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 370 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 370 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 370 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 370 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 370 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=49&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 370 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Outstanding site; 5</span></a><br>
<span class="thumb_list_cate">The Dancing Music Score<br> </t
d></tr>
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 371 HTML Validation
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 371 HTML Validation
d></tr>
</table>
</td>
</tr>
<tr><td colspan="4" height="30" class="thumb_area_bg"></td></tr>
</table>
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellpadding="0" cellspacing="0" width="100%">
<tr>
<td width="25%" valign="top">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellspacing="0" cellpadding="0" style="table-layout:fixed;" width="100%">
<tr><td style="padding-left:10px;padding-right:10px;" height="122" align="center" valign="bottom">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&&select_arrang
e=headnum&des
c=asc&n
o=48&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
<img src="data/toy2/small_48.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a href="zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 383 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 383 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 383 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 383 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 383 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 383 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 383 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 383 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 383 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=48&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 383 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<img src="data/toy2/small_48.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
</tr>
<tr align="center">
<td style="padding-top:6px;line-height:120%;padding-left:10px;padding-right:10px;">
<span style="line-height:120%">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&select_arrang
e=headnum&des
c=asc&n
o=48&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Outstanding site; 7</span></a><br>
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 388 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 388 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 388 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 388 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 388 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 388 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 388 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 388 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 388 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=48&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 388 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Outstanding site; 7</span></a><br>
<span class="thumb_list_cate">The Dancing Music Score<br> </t
d></tr>
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 389 HTML Validation
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 389 HTML Validation
d></tr>
</table>
</td>
<td width="25%" valign="top">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellspacing="0" cellpadding="0" style="table-layout:fixed;" width="100%">
<tr><td style="padding-left:10px;padding-right:10px;" height="122" align="center" valign="bottom">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&&select_arrang
e=headnum&des
c=asc&n
o=47&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
<img src="data/toy2/small_47.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a href="zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 396 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 396 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 396 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 396 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 396 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 396 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 396 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 396 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 396 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=47&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 396 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<img src="data/toy2/small_47.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
</tr>
<tr align="center">
<td style="padding-top:6px;line-height:120%;padding-left:10px;padding-right:10px;">
<span style="line-height:120%">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&select_arrang
e=headnum&des
c=asc&n
o=47&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Nice site; 92415</span></a><br>
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 401 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 401 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 401 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 401 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 401 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 401 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 401 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 401 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 401 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=47&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 401 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Nice site; 92415</span></a><br>
<span class="thumb_list_cate">The Dancing Music Score<br> </t
d></tr>
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 402 HTML Validation
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 402 HTML Validation
d></tr>
</table>
</td>
<td width="25%" valign="top">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellspacing="0" cellpadding="0" style="table-layout:fixed;" width="100%">
<tr><td style="padding-left:10px;padding-right:10px;" height="122" align="center" valign="bottom">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&&select_arrang
e=headnum&des
c=asc&n
o=46&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
<img src="data/toy2/small_46.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a href="zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 409 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 409 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 409 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 409 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 409 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 409 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 409 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 409 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 409 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=46&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 409 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<img src="data/toy2/small_46.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
</tr>
<tr align="center">
<td style="padding-top:6px;line-height:120%;padding-left:10px;padding-right:10px;">
<span style="line-height:120%">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&select_arrang
e=headnum&des
c=asc&n
o=46&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Nice site; 34067</span></a><br>
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 414 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 414 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 414 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 414 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 414 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 414 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 414 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 414 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 414 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=46&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 414 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Nice site; 34067</span></a><br>
<span class="thumb_list_cate">The Dancing Music Score<br> </t
d></tr>
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 415 HTML Validation
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 415 HTML Validation
d></tr>
</table>
</td>
<td width="25%" valign="top">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellspacing="0" cellpadding="0" style="table-layout:fixed;" width="100%">
<tr><td style="padding-left:10px;padding-right:10px;" height="122" align="center" valign="bottom">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&&select_arrang
e=headnum&des
c=asc&n
o=45&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
<img src="data/toy2/small_45.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a href="zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 422 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 422 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 422 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 422 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 422 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 422 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 422 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 422 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 422 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=45&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 422 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<img src="data/toy2/small_45.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
</tr>
<tr align="center">
<td style="padding-top:6px;line-height:120%;padding-left:10px;padding-right:10px;">
<span style="line-height:120%">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&select_arrang
e=headnum&des
c=asc&n
o=45&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Hello; 77817</span></a><br>
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 427 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 427 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 427 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 427 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 427 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 427 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 427 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 427 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 427 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=45&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 427 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Hello; 77817</span></a><br>
<span class="thumb_list_cate">The Dancing Music Score<br> </t
d></tr>
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 428 HTML Validation
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 428 HTML Validation
d></tr>
</table>
</td>
</tr>
<tr><td colspan="4" height="30" class="thumb_area_bg"></td></tr>
</table>
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellpadding="0" cellspacing="0" width="100%">
<tr>
<td width="25%" valign="top">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellspacing="0" cellpadding="0" style="table-layout:fixed;" width="100%">
<tr><td style="padding-left:10px;padding-right:10px;" height="122" align="center" valign="bottom">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&&select_arrang
e=headnum&des
c=asc&n
o=44&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
<img src="data/toy2/small_44.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a href="zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 440 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 440 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 440 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 440 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 440 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 440 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 440 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 440 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 440 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=44&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 440 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<img src="data/toy2/small_44.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
</tr>
<tr align="center">
<td style="padding-top:6px;line-height:120%;padding-left:10px;padding-right:10px;">
<span style="line-height:120%">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&select_arrang
e=headnum&des
c=asc&n
o=44&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Hello; 74250</span></a><br>
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 445 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 445 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 445 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 445 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 445 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 445 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 445 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 445 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 445 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=44&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 445 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Hello; 74250</span></a><br>
<span class="thumb_list_cate">The Dancing Music Score<br> </t
d></tr>
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 446 HTML Validation
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 446 HTML Validation
d></tr>
</table>
</td>
<td width="25%" valign="top">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellspacing="0" cellpadding="0" style="table-layout:fixed;" width="100%">
<tr><td style="padding-left:10px;padding-right:10px;" height="122" align="center" valign="bottom">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&&select_arrang
e=headnum&des
c=asc&n
o=43&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
<img src="data/toy2/small_43.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a href="zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 453 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 453 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 453 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 453 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 453 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 453 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 453 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 453 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 453 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=43&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 453 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<img src="data/toy2/small_43.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
</tr>
<tr align="center">
<td style="padding-top:6px;line-height:120%;padding-left:10px;padding-right:10px;">
<span style="line-height:120%">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&select_arrang
e=headnum&des
c=asc&n
o=43&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Nice site; 34750</span></a><br>
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 458 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 458 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 458 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 458 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 458 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 458 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 458 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 458 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 458 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=43&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 458 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Nice site; 34750</span></a><br>
<span class="thumb_list_cate">The Dancing Music Score<br> </t
d></tr>
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 459 HTML Validation
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 459 HTML Validation
d></tr>
</table>
</td>
<td width="25%" valign="top">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellspacing="0" cellpadding="0" style="table-layout:fixed;" width="100%">
<tr><td style="padding-left:10px;padding-right:10px;" height="122" align="center" valign="bottom">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&&select_arrang
e=headnum&des
c=asc&n
o=42&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
<img src="data/toy2/small_42.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a href="zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 466 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 466 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 466 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 466 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 466 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 466 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 466 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 466 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 466 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=42&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 466 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<img src="data/toy2/small_42.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
</tr>
<tr align="center">
<td style="padding-top:6px;line-height:120%;padding-left:10px;padding-right:10px;">
<span style="line-height:120%">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&select_arrang
e=headnum&des
c=asc&n
o=42&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Hello; 65771</span></a><br>
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 471 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 471 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 471 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 471 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 471 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 471 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 471 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 471 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 471 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=42&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 471 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Hello; 65771</span></a><br>
<span class="thumb_list_cate">The Dancing Music Score<br> </t
d></tr>
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 472 HTML Validation
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 472 HTML Validation
d></tr>
</table>
</td>
<td width="25%" valign="top">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellspacing="0" cellpadding="0" style="table-layout:fixed;" width="100%">
<tr><td style="padding-left:10px;padding-right:10px;" height="122" align="center" valign="bottom">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&&select_arrang
e=headnum&des
c=asc&n
o=41&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
<img src="data/toy2/small_41.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a href="zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 479 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 479 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 479 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 479 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 479 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 479 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 479 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 479 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 479 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=41&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 479 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<img src="data/toy2/small_41.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
</tr>
<tr align="center">
<td style="padding-top:6px;line-height:120%;padding-left:10px;padding-right:10px;">
<span style="line-height:120%">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&select_arrang
e=headnum&des
c=asc&n
o=41&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Hello; 48980</span></a><br>
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 484 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 484 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 484 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 484 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 484 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 484 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 484 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 484 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 484 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=41&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 484 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Hello; 48980</span></a><br>
<span class="thumb_list_cate">The Dancing Music Score<br> </t
d></tr>
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 485 HTML Validation
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 485 HTML Validation
d></tr>
</table>
</td>
</tr>
<tr><td colspan="4" height="30" class="thumb_area_bg"></td></tr>
</table>
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellpadding="0" cellspacing="0" width="100%">
<tr>
<td width="25%" valign="top">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellspacing="0" cellpadding="0" style="table-layout:fixed;" width="100%">
<tr><td style="padding-left:10px;padding-right:10px;" height="122" align="center" valign="bottom">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&&select_arrang
e=headnum&des
c=asc&n
o=40&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
<img src="data/toy2/small_40.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a href="zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 497 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 497 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 497 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 497 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 497 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 497 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 497 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 497 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 497 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=40&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 497 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<img src="data/toy2/small_40.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
</tr>
<tr align="center">
<td style="padding-top:6px;line-height:120%;padding-left:10px;padding-right:10px;">
<span style="line-height:120%">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&select_arrang
e=headnum&des
c=asc&n
o=40&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Hello; 26678</span></a><br>
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 502 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 502 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 502 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 502 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 502 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 502 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 502 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 502 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 502 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=40&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 502 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Hello; 26678</span></a><br>
<span class="thumb_list_cate">The Dancing Music Score<br> </t
d></tr>
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 503 HTML Validation
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 503 HTML Validation
d></tr>
</table>
</td>
<td width="25%" valign="top">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellspacing="0" cellpadding="0" style="table-layout:fixed;" width="100%">
<tr><td style="padding-left:10px;padding-right:10px;" height="122" align="center" valign="bottom">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&&select_arrang
e=headnum&des
c=asc&n
o=39&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
<img src="data/toy2/small_39.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a href="zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 510 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 510 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 510 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 510 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 510 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 510 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 510 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 510 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 510 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=39&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 510 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<img src="data/toy2/small_39.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
</tr>
<tr align="center">
<td style="padding-top:6px;line-height:120%;padding-left:10px;padding-right:10px;">
<span style="line-height:120%">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&select_arrang
e=headnum&des
c=asc&n
o=39&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Hi, Excellent site;</span></a><br>
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 515 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 515 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 515 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 515 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 515 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 515 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 515 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 515 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 515 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=39&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 515 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Hi, Excellent site;</span></a><br>
<span class="thumb_list_cate">The Dancing Music Score<br> </t
d></tr>
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 516 HTML Validation
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 516 HTML Validation
d></tr>
</table>
</td>
<td width="25%" valign="top">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellspacing="0" cellpadding="0" style="table-layout:fixed;" width="100%">
<tr><td style="padding-left:10px;padding-right:10px;" height="122" align="center" valign="bottom">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&&select_arrang
e=headnum&des
c=asc&n
o=38&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
<img src="data/toy2/small_38.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a href="zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 523 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 523 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 523 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 523 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 523 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 523 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 523 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 523 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 523 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=38&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 523 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<img src="data/toy2/small_38.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
</tr>
<tr align="center">
<td style="padding-top:6px;line-height:120%;padding-left:10px;padding-right:10px;">
<span style="line-height:120%">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&select_arrang
e=headnum&des
c=asc&n
o=38&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Hello; 50003</span></a><br>
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 528 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 528 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 528 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 528 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 528 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 528 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 528 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 528 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 528 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=38&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 528 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Hello; 50003</span></a><br>
<span class="thumb_list_cate">The Dancing Music Score<br> </t
d></tr>
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 529 HTML Validation
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 529 HTML Validation
d></tr>
</table>
</td>
<td width="25%" valign="top">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellspacing="0" cellpadding="0" style="table-layout:fixed;" width="100%">
<tr><td style="padding-left:10px;padding-right:10px;" height="122" align="center" valign="bottom">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&&select_arrang
e=headnum&des
c=asc&n
o=37&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
<img src="data/toy2/small_37.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a href="zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 536 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 536 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 536 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 536 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 536 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 536 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 536 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 536 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 536 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=37&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 536 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" onfocus="blur()">
Add an ALT attribute describing each image, which screen readers read aloud.
Spacer images and purely decorative images should use ALT=''.
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<img src="data/toy2/small_37.thumb" width="120" height="120" onFocus="blur()" border="0" class="thumb_border
"></a></td>
</tr>
<tr align="center">
<td style="padding-top:6px;line-height:120%;padding-left:10px;padding-right:10px;">
<span style="line-height:120%">
<a href="zboard.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&select_arrang
e=headnum&des
c=asc&n
o=37&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Outstanding site; 9</span></a><br>
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 541 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 541 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 541 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 541 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 541 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 541 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 541 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 541 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 541 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=37&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 541 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53" ><span class="thumb_list_title">Outstanding site; 9</span></a><br>
<span class="thumb_list_cate">The Dancing Music Score<br> </t
d></tr>
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 542 HTML Validation
End tag for "SPAN" omitted, but its declaration does not permit this.
Line 542 HTML Validation
d></tr>
</table>
</td>
</tr>
<tr><td colspan="4" height="30" class="thumb_area_bg"></td></tr>
</table>
</td></tr>
</table>
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellpadding="0" cellspacing="0" width="100%" class="thumb_area_bg">
<tr>
<td class="thumb_area_bg" style="padding:10px 3px 5px 10px" align="center">
<font class=han><b>1</b>
<a onfocus=blu
r() href='/bbs/zboard.php?id=toy2&pag
e=2&select_arrang
e=headnum&des
c=asc
&categor
y=&s
n=off&s
s=on&s
c=on&keywor
d=&sn
1=&divpag
e=1&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53'><font class=han> 2 </
a> <br>
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a onfocus=blu
An attribute value must be a literal unless it contains only name characters.
Line 558 HTML Validation
r() href='/bbs/zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 558 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=2&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 558 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 558 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 558 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 558 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
&categor
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 558 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
y=&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 558 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 558 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 558 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&keywor
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 558 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
d=&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 558 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 558 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 558 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53'><font class=han> 2 </
End tag for "FONT" omitted, but its declaration does not permit this.
Line 558 HTML Validation
a> <br>
</t
d>
End tag for "FONT" omitted, but its declaration does not permit this.
Line 559 HTML Validation
d>
</tr>
</table>
<div style="width:100%" class="info_bg">
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellpadding="0" cellspacing="0" width="100%" class="info_bg">
<tr><td class="line2" style="height:1px"></td></tr>
<tr><td class="line1" style="height:1px"></td></tr>
</table>
<div class="vSpacer info_bg"></div>
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border="0" cellpadding="0" cellspacing="0" width="100%" class="info_bg">
<tr><td height="5" colspan="3"></td></tr>
<tr valign="top" align="left">
<td style="padding-left:10px;">
<nob
r>
<a onfocus=blu
r() href='/bbs/zboard.php?id=toy2&pag
e=1&categor
y=&s
n=off&s
s=on&s
c=on&keywor
d=
&prev_n
o=&sn
1=&divpag
e=1&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53'><font class=han style=font-weight:bold>-refresh</font></a>
<a onfocus=blu
r() href='/bbs/zboard.php?id=toy2&pag
e=2&select_arrang
e=headnum&des
c=asc&categor
y=&s
n=off&s
s=on&s
c=on&keywor
d=&sn
1=&divpag
e=1&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53'><font class=han style=font-weight:bold>-next page</font></a> </nobr>
This happens when the version of HTML used on this page doesn't support an element with this name. This can happen
if the element is misspelled, is uppercase or mixed case in XHTML, or isn't supported by some HTML versions.
For example, HTML 4 DOCTYPEs don't allow HTML 5 element and Strict DOCTYPEs don't allow stylistic elements
and frames which were present in earlier versions of HTML.
r>
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a onfocus=blu
An attribute value must be a literal unless it contains only name characters.
Line 574 HTML Validation
r() href='/bbs/zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&categor
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
y=&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&keywor
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
d=
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
&prev_n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53'><font class=han style=font-weight:bold>-refresh</font></a>
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a onfocus=blu
An attribute value must be a literal unless it contains only name characters.
Line 574 HTML Validation
r() href='/bbs/zboard.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=2&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&categor
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
y=&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&keywor
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
d=&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 574 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53'><font class=han style=font-weight:bold>-next page</font></a> </nobr>
</td>
<td align="right"><nob
r>
<a onfocus=blu
r() href='write.php?id=toy2&pag
e=1&sn
1=&divpag
e=1&s
n=off&s
s=on&s
c=on&select_arrang
e=headnum&des
c=asc&n
o=
&mod
e=write&sn
1=&divpag
e=1&PHPSESSI
D=c864edaa7c0fc2470eef377343ecdb53'><font class=han2 style='font-weight:bold'>-write</font></a></
a></nobr></td>
This happens when the version of HTML used on this page doesn't support an element with this name. This can happen
if the element is misspelled, is uppercase or mixed case in XHTML, or isn't supported by some HTML versions.
For example, HTML 4 DOCTYPEs don't allow HTML 5 element and Strict DOCTYPEs don't allow stylistic elements
and frames which were present in earlier versions of HTML.
r>
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
<a onfocus=blu
An attribute value must be a literal unless it contains only name characters.
Line 576 HTML Validation
r() href='write.php?id=toy2&pag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 576 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 576 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 576 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 576 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
n=off&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 576 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
s=on&s
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 576 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=on&select_arrang
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 576 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=headnum&des
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 576 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
c=asc&n
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 576 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
o=
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 576 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 576 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
&mod
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 576 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=write&sn
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 576 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
1=&divpag
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 576 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
e=1&PHPSESSI
An unknown entity has been used. This often happens when ¶m=value is used instead of &param=value in URL query strings.
Line 576 HTML Validation Ampersand Problem
In HTML the ampersand character (&) is reserved for marking character entities
so you should never use raw ampersands in HTML - including ampersands inside URLs.
For example, any URL that needs an ampersand should look like:
http://www.example.com/file.html?var1=val1&var2=val2&var3=val3
D=c864edaa7c0fc2470eef377343ecdb53'><font class=han2 style='font-weight:bold'>-write</font></a></
a></nobr></td>
<td style="width:10px"></td>
</tr>
</table>
<div class="vSpacer2 info_bg" style="width:100%"></div>
</div>
print_ZBlayer('zbLayer1', '', '', '', 'toy2', '%A4%B8%A4%A7%A4%A1', '', '', '', '');
print_ZBlayer('zbLayer2', 'http://buyultramonline.posterous.com%2F', 'andvb2RpcmlrQGh1bnRlci5jb20=', '', 'toy2', 'jwoodirik', '', '', '', '');
print_ZBlayer('zbLayer3', 'http://buy-lipitor-online.webstarts.com%2F', 'andubml3b3NpQHJhY2hlbC5jb20=', '', 'toy2', 'jwnniwosi', '', '', '', '');
print_ZBlayer('zbLayer4', 'http://www.denisebauer.com%2Fbuy-cheap-viagra%2F', 'andtbmlzb2RAcG90dGVyLmNvbQ==', '', 'toy2', 'jwmnisod', '', '', '', '');
print_ZBlayer('zbLayer5', 'http://www.blurryblog.com%2F', 'anZsd2lza2lvc0BtYXJrLmNvbQ==', '', 'toy2', 'jvlwiskios', '', '', '', '');
print_ZBlayer('zbLayer6', 'http://www.protectadult.com%2F', 'anZra3dpcXNrQG9wZW4uY29t', '', 'toy2', 'jvkkwiqsk', '', '', '', '');
print_ZBlayer('zbLayer7', 'http://www.protectadult.com%2F', 'anZha2Rpc2lrQHNpdGUuY29t', '', 'toy2', 'jvakdisik', '', '', '', '');
print_ZBlayer('zbLayer8', 'http://buycheapultram.webstarts.com%2F', 'aGZicW9hcGxza0BzY3JlZW4uY29t', '', 'toy2', 'hfbqoaplsk', '', '', '', '');
print_ZBlayer('zbLayer9', 'http://buycheapcialis.webstarts.com%2F', 'aGV5cW9hcHNsQHNwb3J0LmNvbQ==', '', 'toy2', 'heyqoapsl', '', '', '', '');
print_ZBlayer('zbLayer10', 'http://buycheapaccutane.webstarts.com%2F', 'aGVpc29wYWxkcUBzaW1zLmNvbQ==', '', 'toy2', 'heisopaldq', '', '', '', '');
print_ZBlayer('zbLayer11', 'http://buytramadolonline.webstarts.com%2F', 'aGRhb3dwZGtsYUBoZWF2ZW4uY29t', '', 'toy2', 'hdaowpdkla', '', '', '', '');
print_ZBlayer('zbLayer12', 'http://buy-acomplia-online.webstarts.com%2F', 'aGN0cW9hcGtkbEBtYXJzLmNvbQ==', '', 'toy2', 'hctqoapkdl', '', '', '', '');
print_ZBlayer('zbLayer13', 'http://buy-celebrex-online.webstarts.com%2F', 'aGNwYW9xcGVrZGxAYmx1ZS5jb20=', '', 'toy2', 'hcpaoqpekdl', '', '', '', '');
print_ZBlayer('zbLayer14', 'http://buyultramonline.webstarts.com%2F', 'aGNtYW9xcGRsa0BncmVlbi5jb20=', '', 'toy2', 'hcmaoqpdlk', '', '', '', '');
print_ZBlayer('zbLayer15', 'http://www.blurryblog.com%2F', 'aGNqYXBvd2tkbEB3ZWRuZXNkYXkuY29t', '', 'toy2', 'hcjapowkdl', '', '', '', '');
print_ZBlayer('zbLayer16', 'http://www.buytramadol.co%2F', 'aGJvcXBha3NkbGZAaGFtbWVyLmNvbQ==', '', 'toy2', 'hboqpaksdlf', '', '', '', '');
</script>
Identify row and column headers in data tables using TH elements, and mark layout tables with role='presentation'.
Data tables allow screen reader users to understand column and row relationships.
Layout tables read cells as a series of unrelated paragraphs with no tabular structure.
Without TH or ROLE, screen readers apply heuristics to decide whether a table is a layout table or data table.
These heuristics vary greatly between screen readers, and are affected by browser being used, window size,
and font size (so the outcome is very unpredictable without TH or ROLE).
If a data table has headers marked up using TD, then change these to TH.
If a data table has no headers, add TH elements describing each row and/or column.
If the table is only used for layout add role='presentation' to the TABLE element.
<table border=0 cellpadding=0 cellspacing=0 height=20 width=10
An attribute value must be a literal unless it contains only name characters.
Line 602 HTML Validation
0%>
<tr>
<td align=right style=font-family:tahom
a,굴림;font-size:8pt;line-height:150%;letter-spacing:0px>
An attribute value must be a literal unless it contains only name characters.
Line 604 HTML Validation
a,굴림;font-size:8pt;line-height:150%;letter-spacing:0px>
<font style=font-size:7pt>Copyright 1999-2014</font>
<a href=http://www.zeroboard.com target=_blank onfocus=blur()><font style=font-family:tahom
a,굴림;font-size:8pt;>Zeroboard
</a> / skin b
y <a id="skinbydq" href="http://www.dqstyle.com" target="_blank" onfocus="blur()">DQ'Style</a>
Add text to the link, or ALT text if the link contains an image. If there is no link text or the ALT tag is blank, screen readers have nothing to read, so read out the URL instead.
<a href=http://www.zeroboard.com target=_blank onfocus=blur()><font style=font-family:tahom
An attribute value must be a literal unless it contains only name characters.
Line 605 HTML Validation
a,굴림;font-size:8pt;>Zeroboard
</a> / skin b
This field removes focus when tabbed to making it impossible for disabled users to navigate this form via the keyboard.
Using blur() in an onfocus handler makes the form impossible to use with a keyboard. Remove the call to blur() in the onfocus handler.
y <a id="skinbydq" href="http://www.dqstyle.com" target="_blank" onfocus="blur()">DQ'Style</a>
</t
d>
End tag for "FONT" omitted, but its declaration does not permit this.
Line 606 HTML Validation
d>
</tr>
</table>
<!-- 이미지 리사이즈를 위해서 처리하는 부분 -->
function zb_img_check(){
var zb_main_table_width = document.zb_get_table_width.width;
var zb_target_resize_num = document.zb_target_resize.length;
for(i=0;i<zb_target_resize_num;i++){
if(document.zb_target_resize[i].width > zb_main_table_width) {
document.zb_target_resize[i].width = zb_main_table_width;
}
}
}
window.onload = zb_img_check;
</script>
</div>
</body>
</html>
<!--
Session Excuted : 0.0107
Connect Checked : 0.0007
Query Excuted : 3.314
PHP Excuted : 0.011
Check Lists : 0.008
Skins Excuted : 0.849
Total Excuted Time : 4.185
-->